Bambu Lab X1C 3D printer
Hacker ApprovedShares rank 9 of 18 3D printers by recommenders
Fast, reliable and easy to set up out of the box, with consistent prints. Main caveat: questionable software and issues when run 24/7.
Fast, reliable and easy to set up out of the box, with consistent prints. Main caveat: questionable software and issues when run 24/7.
25 people gave an opinion
- recommend it
- 19
- criticize it
- 6
- approval share
- 76%
Recommended in 6 of 13 months
- November 2025: recommended
- December 2025: not recommended
- January 2026: not recommended
- February 2026: recommended
- March 2026: not recommended
- April 2026: recommended
- May 2026: recommended
- June 2026: not recommended
- July 2026: not recommended
- August 2026: recommended
- September 2026: recommended
- October 2026: not recommended
- November 2026: not recommended (month in progress)
Owned for 3 months
Median of the 3 owners who said how long they have had it.
Each square is one year.
Why it carries the badge
- 19 people recommend itNeeds 10 or more, met.
- 3.2 recommenders for every criticNeeds 2 to 1 or better, met.
- Recommended in 6 of 13 monthsNeeds 4 or more, met.
The same three rules apply to every product, and the badge can’t be bought. How the badge works
What people say about it
The reasons people give, with the number of comments that give each one. Open a reason to read what they said.
Why people recommend it
Each mark is one comment
Works out of the box
“My X1C just works, I've printed more with it since I've bought it than all the other printers I owned combined.”
Comment from 21 Sep 2026 in “Sherline Tools Is Going Out of Business” “its whole selling point was that it was fast and worked, out of the box”
Comment from 6 Feb 2026 in “My AI Adoption Journey” “For the most part, my X1C + AMS set up was just plug and play”
Comment from 19 Apr 2026 in “I built a 3D printing business and ran it for 8 months” - Comment from 16 Feb 2026 in “LT6502: A 6502-based homebrew laptop”
Fast, consistent, accurate prints
“what made the X1 stand out as the fast+good-qual printer when it launched”
Comment from 10 May 2026 in “Louis Rossmann tells 3D printer maker Bambu Lab to 'Go (Bleep) yourself'” “I've always got more consistent and accurate prints out of my x1c”
Comment from 10 May 2026 in “Louis Rossmann tells 3D printer maker Bambu Lab to 'Go (Bleep) yourself'” Good hardware and engineering
“Bambu made real engineering improvements: linear slides, servomotor for feed, accelerometer tuning, etc.”
Comment from 10 May 2026 in “Louis Rossmann tells 3D printer maker Bambu Lab to 'Go (Bleep) yourself'” “it's a very nice piece of hardware with questionable software”
Comment from 26 Aug 2026 in “An ongoing 3D-printer AGPL violation” “It's way ahead of any other 3D printer I've owned or built.”
Comment from 12 May 2026 in “Bambu Lab is abusing the open source social contract” - Comment from 10 May 2026 in “Louis Rossmann tells 3D printer maker Bambu Lab to 'Go (Bleep) yourself'”
Better than alternatives at its price
“At the time I bought my bambulab X1C there was nothing at the level for a similar price”
Comment from 27 Aug 2026 in “An ongoing 3D-printer AGPL violation” “a really good Core XY printer with an enclosure for $1500”
Comment from 12 May 2026 in “Louis Rossmann tells 3D printer maker Bambu Lab to 'Go (Bleep) yourself'” “they simply didn't have something as good as the Bambu”
Comment from 27 Aug 2026 in “An ongoing 3D-printer AGPL violation”
What people warn about
Each mark is one comment
Questionable software and security
“it's a very nice piece of hardware with questionable software”
Comment from 26 Aug 2026 in “An ongoing 3D-printer AGPL violation” “Their whole excuse about security was nonsense then and it’s nonsense now.”
Comment from 12 May 2026 in “Bambu Lab is abusing the open source social contract” Wear parts and noise issues
“had to be thrown out because of a pully that was worn out and not replaceable”
Comment from 24 May 2026 in “'Fuck you, Bambu': How one private message could change the face of 3D printing” “never ending quality issues, never ending CF rod noise”
Comment from 10 May 2026 in “Louis Rossmann tells 3D printer maker Bambu Lab to 'Go (Bleep) yourself'” Some owners returned it
“Same experience. Wanted to get an X1C after I had saved enough, then I was lucky enough to be able to send it back”
Comment from 11 May 2026 in “Louis Rossmann tells 3D printer maker Bambu Lab to 'Go (Bleep) yourself'” “I have owned a X1C for 3 months, returned it”
Comment from 12 May 2026 in “Bambu Lab is abusing the open source social contract”
Other 3D printers people recommend
The four most recommended other 3D printers, with the same counts for each, so you can compare like for like. The tick on each bar marks the 2 to 1 line the badge needs.
| Product | Recommend | Criticize | Approval | Months | Owned | Badge |
|---|---|---|---|---|---|---|
| Bambu Lab 3D printer | 124 | 150 | 45% | 12 | — | — |
| Prusa 3D printer | 68 | 25 | 73% | 9 | 5 yrs5 owners | Approved |
| Bambu Lab P1S | 29 | 9 | 76% | 6 | 1.5 yrs10 owners | Approved |
| Prusa MK3 | 28 | 9 | 76% | 7 | 6 yrs3 owners | Approved |
| Bambu Lab X1C 3D printerThis page | 19 | 6 | 76% | 6 | 3 mo3 owners | Approved |
What people said
All 30 comments that mention it, newest first. Each links to the original comment.
“My X1C just works, I've printed more with it since I've bought it than all the other printers I owned combined.”
“they simply didn't have something as good as the Bambu”
“At the time I bought my bambulab X1C there was nothing at the level for a similar price”
“My X1C still behaves the same as when I bought it”
“it's a very nice piece of hardware with questionable software”
“had to be thrown out because of a pully that was worn out and not replaceable”
“My X1C is still going strong, running in developer mode”
“I have owned a X1C for 3 months, returned it”
“Their customer service has been great, too”
“It's way ahead of any other 3D printer I've owned or built.”
“Their whole excuse about security was nonsense then and it’s nonsense now.”
“a really good Core XY printer with an enclosure for $1500”
“It has worked flawlessly with OrcaSlicer ever since.”
“there is absolutely NO comparison - EVERYTHING was community, Reddit, forum or random YouTube guidance from non-manufacturers”
“Same experience. Wanted to get an X1C after I had saved enough, then I was lucky enough to be able to send it back”
“never ending quality issues, never ending CF rod noise”
“Bambu made real engineering improvements: linear slides, servomotor for feed, accelerometer tuning, etc.”
“the convenience and reliability far outweigh any cons for me”
“the AMS system for the X1C pales in comparison”
“the hardware is still really fantastic (as a X1C owner)”
“I've always got more consistent and accurate prints out of my x1c”
“they make a decent printer”
“I made the tragic mistake of getting a Bambu printer”
“what made the X1 stand out as the fast+good-qual printer when it launched”
“For the most part, my X1C + AMS set up was just plug and play”
“The Bambu X1C is reliable, you just can't run it 24/7 and not run into issues.”
“Consider buying a used X1c someone is selling to upgrade.”
“it just works 99 percent of the time”
“its whole selling point was that it was fast and worked, out of the box”
“it is a world of difference. I would never go back.”
Counts come from 1,795,640 Hacker News comments, November 2025 to November 2026. How we count. Report a mistake.